个人简介：
林骥，男，博士，副研究员。
研究方向：界面力学，软物质力学，弹塑性本构理论
邮箱：linji@nbu.edu.cn
联系地址：宁波大学宗瑞航海楼
教育经历
2012.09-2017.09 浙江大学（航空航天学院） 工程力学 工学博士
2008.09-2012.06 浙江大学（航空航天学院） 工程力学 工学学士
工作经历
2017.10-2021.10 浙江大学 应用力学研究所 博士后
2021.11- 宁波大学 机械工程与力学学院 副研究员
主持科研项目
国家自然科学基金，青年科学基金（项目编号：12002302）
非晶态聚合物时温依赖的脆韧转变行为：实验和理论研究
博士后面上基金（项目编号：2020M671704）
非晶态聚合物脆韧转变失效行为的实验和理论研究
科研成果
1.Lin, J., Dai L., Qian J., et al., 2021. Modeling the rate-dependent ductile-brittle transition in amorphous polymers Acta Mechanica Sinica.
2.Lin, J., Li X.K., Yin J., et al., 2020. Effect of cyclic stretch on neuron reorientation and axon outgrowth. Frontiers in Bioengineering and Biotechnology. (共同一作).
3.Lin, J., Wang Y.Z., Qian J., 2020. Effects of domain unfolding and catch-like dissociation on the collective behavior of integrin-fibronectin bond clusters. Acta Mechanica Sinica.
4.Lin, J.#, Zheng, S.Y.#, Xiao, R., et al., 2020. Constitutive behaviors of tough physical hydrogels with dynamic metal-coordinated bonds. Journal of the Mechanics and Physics of Solids. (共同一作).
5.Wang, C.H. #, Lin, J. #, Zhang, D.M., et al., 2019. Porous morphology and mechanical properties of poly(lactide-co-glycolide) hollow fiber membranes governed by ternary-phase inversion. Journal of Membrane Science. (共同一作).
6.Ma, P.Y.#, Niu, B.F.#, Lin, J. #, et al., 2019. Sequentially controlled deformations of patterned hydrogels into 3d configurations with multilevel structures. Macromolecular Rapid Communications. (共同一作).
7.Lin, J., Lin, Y., Qian, J., 2017. Concurrent rupture of two molecular bonds in series: implications for dynamic force spectroscopy. Journal of Applied Mechanics-Transactions of the ASME.
8.Qian J., Lin J., Xu G.K., et al., 2017. Thermally assisted peeling of an elastic strip in adhesion with a substrate via molecular bonds. Journal of the Mechanics and Physics of Solids.
9.Qian J., Lin J., Shi M.X., 2017. Combined dry and wet adhesion between a particle and an elastic substrate. Journal of Colloid & Interface Science.
10.Lin J., Qian J., Yin J., et al., 2016. Biointerfaces mediated by molecular bonds: cohesive behaviors. International Journal of Applied Mechanics.
11.林骥, 林原, 钱劲, 2016. 从确定性到随机性的黏附接触理论. 科学通报. (EI)
12.Lin J., Lin Y., Qian J., 2014. Statistical pull off of nanoparticles adhering to compliant substrates. Langmuir.
13.Tang, N., Lei, D., Lin, J., Wang, Y., Xiao, R., 2021. Modeling the damage and self-healing behaviors of plasticized pvc gels. Acta Mechanica Solida Sinica.
14.Chu, H., Lin J., Lei, D., Qian, J., Xiao, R., 2020. A network evolution model for recovery of the mullins effect in filled rubbers. International Journal of Applied Mechanics.
15.Zhu F.B., Zheng S.Y., Lin J., et al., 2020 Integrated multifunctional flexible electronics based on tough supramolecular hydrogels with patterned silver nanowires. Journal of Materials Chemistry C.
16.Zheng, S.Y., Liu, C., Jiang, L., Lin, J., Qian, J., Mayumi, K., Wu, Z.L., Ito, K., Zheng, Q., 2019. Slide-ring cross-links mediated tough metallosupramolecular hydrogels with superior self-recoverability. Macromolecules.
17.Gong, B., Lin, J., Wei, X., et al., 2019 Cross-linked biopolymer networks with active motors: mechanical response and intra-network transport. Journal of the Mechanics and Physics of Solids.
18.Wu, Y., Hao, X.P., Xiao, R., Lin, J., Wu, Z.L., Yin, J., Qian, J., 2019. Controllable bending of bi-hydrogel strips with differential swelling. Acta Mechanica Solida Sinica.
19.Zhu F.B., Lin J. Wu Z.L., et al., 2018. Tough and conductive hybrid hydrogels enabling facile patterning. ACS Applied Materials & Interfaces.
20.Li, L., Tang, H., Wang, J.Z., Lin, J., Yao, H.M., 2018. Rolling adhesion of cell in shear flow: A theoretical model. Journal of the Mechanics and Physics of Solids.
21.Feng Y., Lin J., Qian J., 2017. Interpretations of receptor–ligand dissociation kinetics from single-molecule pulling experiments. International Journal of Applied Mechanics.
22.Gong B., Lin J., Qian J., 2017. Growing actin networks regulated by obstacle size and shape. Acta Mechanica Sinica.
